TheGigRig G3s

£1,595.00

We always stock the very latest version of G3

Available on back-order

logo

The G3S is TheGigRig’s flagship programmable pedalboard switcher, with 13 effects loops, 14 footswitches, 99 banks of presets and an OLED display on every switch showing your preset names. It gives you built-in wet/dry with no extra hardware, programmable pre- and post-gain volume on every preset, and a Hi-Def isolated, phase-reversible second output for running two amps with no earth loops.

One press changes everything
Each pedal plugs into its own loop on the G3S, once. After that a preset is a snapshot of your whole board: which pedals are on, what order they're in, and your volume. Verse to chorus is one footswitch, not a tap dance. Your pedals don't need MIDI. If you have MIDI gear, the G3S controls that too.

You always know what your foot will do
Every preset switch has its own screen showing the name you gave it, such as CLEAN, SOLO or LEAD, readable on the darkest stage. Change bank and every screen renames itself. With 99 banks, each song can have its own.

Your tone, left alone
Every loop is true bypass, so a pedal that is off is out of your signal path completely. You hear your effects and amps as they were designed to sound. Each preset stores its own volume, so your solo level is the same every night.

Two amps, no hum
Two amps normally hum when you connect them together. The second output has our Hi-Def transformer-less isolation and a phase switch, so they work together quietly. Wet/dry is built in: your dry guitar in one amp and your effects in the other, with no extra boxes.

Set it up from your phone or computer
Name presets, build set lists and back up your whole rig over Bluetooth with the G3 Web Editor or the G3 Gig Companion app. The latest software is free and adds an analogue stereo tremolo.

Size
The G3S is 44 cm wide and 13 cm deep (17.3" x 5.1"). Smaller board? The G3S Atom has the same screens and sound in a smaller footprint.

 

G3 Key Features

  • 99 Banks with up to 28 Pre-sets per Bank
  • Programable Pre Effects Loop Buffer/Boost
  • Programable Post Effects Loop True Stereo VCA Amplifier
  • 12 x True-Bypass passive mono effects loop which can paired for up to 6 x stereo effects
  • Fully movable loops - Reorganise your entire signal chain, Per Pre-set, in seconds
  • 2 x Programable Outputs one of which is transformer isolated and phase reversible to eliminate earth loops and phase problems when using two amps
  • Built in Parallel and Wet/Dry configuration
  • Send up to 15 x programable mappable PC/CC MIDI Messages per pre-set
  • 2 x Expression pedal inputs capable of controlling the onboard pre and post effect loop amplifiers as well as sending multiple MIDI CC messages, each with separate heel/toe values
  • Program Reverb and Delay Trails/Spillover from any loop or combination of loops
  • Simple intuitive programming via easily navigated built in menu system
  • Ultra clean signal path to ensure your guitar signal is as pure as possible
  • Bluetooth enabled - *Connect to G3 iOS app to update software, backup pre-sets, and edit song lists
  • High Resolution Ultra-Bright TFT LCD screen displaying Bank, Pre-set Number /Name and Pre/Post Gain levels and menu system (Brightness Adjustable)
  • Black anodized aluminium chassis – Light weight and hard wearing
  • Water resistant/ splash proof overlay with quick select, tactile embossed membrane switches
  • 14 x GigRig 'Optokick' Optical Footswitches - Designed by The GigRig, our footswitches use light instead of mechanics to do the foot switching and are milled from stainless steel, making them more robust than their mechanical alternatives. We believe these are the most reliable foot switches in the world.
  • FREE GigRig Generator Power Supply - The Heart of our Modular Power Supply range, with UK Mains lead included as standard.

Technical Info

  • Physical size: 44cm x 13cm x 7.8cm / 17.3" x 5.1" x 3.07"
  • Screen size: Approximately 5 x 3.8cm / 1.96"x 1.5"
  • Power Requirements: 9V DC (2.1mm centre neg) @ 650mA.We recommend the use of The GigRig Generator power supply supplied with The G3 Switching System. (Strymon Zuma, True Tone 1-Spot and Voodoo Labs Pedal Power 2 have been tested to power G3 sufficiently).
  • Weight: 2kgs / 4.40lbs (Without Generator)

 

G3 USER MANUAL

TheGigRig G3s

£1,595.00

Available on back-order

logo

The G3S is TheGigRig’s flagship programmable pedalboard switcher, with 13 effects loops, 14 footswitches, 99 banks of presets and an OLED display on every switch showing your preset names. It gives you built-in wet/dry with no extra hardware, programmable pre- and post-gain volume on every preset, and a Hi-Def isolated, phase-reversible second output for running two amps with no earth loops.

One press changes everything
Each pedal plugs into its own loop on the G3S, once. After that a preset is a snapshot of your whole board: which pedals are on, what order they're in, and your volume. Verse to chorus is one footswitch, not a tap dance. Your pedals don't need MIDI. If you have MIDI gear, the G3S controls that too.

You always know what your foot will do
Every preset switch has its own screen showing the name you gave it, such as CLEAN, SOLO or LEAD, readable on the darkest stage. Change bank and every screen renames itself. With 99 banks, each song can have its own.

Your tone, left alone
Every loop is true bypass, so a pedal that is off is out of your signal path completely. You hear your effects and amps as they were designed to sound. Each preset stores its own volume, so your solo level is the same every night.

Two amps, no hum
Two amps normally hum when you connect them together. The second output has our Hi-Def transformer-less isolation and a phase switch, so they work together quietly. Wet/dry is built in: your dry guitar in one amp and your effects in the other, with no extra boxes.

Set it up from your phone or computer
Name presets, build set lists and back up your whole rig over Bluetooth with the G3 Web Editor or the G3 Gig Companion app. The latest software is free and adds an analogue stereo tremolo.

Size
The G3S is 44 cm wide and 13 cm deep (17.3" x 5.1"). Smaller board? The G3S Atom has the same screens and sound in a smaller footprint.

 

G3 Key Features

  • 99 Banks with up to 28 Pre-sets per Bank
  • Programable Pre Effects Loop Buffer/Boost
  • Programable Post Effects Loop True Stereo VCA Amplifier
  • 12 x True-Bypass passive mono effects loop which can paired for up to 6 x stereo effects
  • Fully movable loops - Reorganise your entire signal chain, Per Pre-set, in seconds
  • 2 x Programable Outputs one of which is transformer isolated and phase reversible to eliminate earth loops and phase problems when using two amps
  • Built in Parallel and Wet/Dry configuration
  • Send up to 15 x programable mappable PC/CC MIDI Messages per pre-set
  • 2 x Expression pedal inputs capable of controlling the onboard pre and post effect loop amplifiers as well as sending multiple MIDI CC messages, each with separate heel/toe values
  • Program Reverb and Delay Trails/Spillover from any loop or combination of loops
  • Simple intuitive programming via easily navigated built in menu system
  • Ultra clean signal path to ensure your guitar signal is as pure as possible
  • Bluetooth enabled - *Connect to G3 iOS app to update software, backup pre-sets, and edit song lists
  • High Resolution Ultra-Bright TFT LCD screen displaying Bank, Pre-set Number /Name and Pre/Post Gain levels and menu system (Brightness Adjustable)
  • Black anodized aluminium chassis – Light weight and hard wearing
  • Water resistant/ splash proof overlay with quick select, tactile embossed membrane switches
  • 14 x GigRig 'Optokick' Optical Footswitches - Designed by The GigRig, our footswitches use light instead of mechanics to do the foot switching and are milled from stainless steel, making them more robust than their mechanical alternatives. We believe these are the most reliable foot switches in the world.
  • FREE GigRig Generator Power Supply - The Heart of our Modular Power Supply range, with UK Mains lead included as standard.

Technical Info

  • Physical size: 44cm x 13cm x 7.8cm / 17.3" x 5.1" x 3.07"
  • Screen size: Approximately 5 x 3.8cm / 1.96"x 1.5"
  • Power Requirements: 9V DC (2.1mm centre neg) @ 650mA.We recommend the use of The GigRig Generator power supply supplied with The G3 Switching System. (Strymon Zuma, True Tone 1-Spot and Voodoo Labs Pedal Power 2 have been tested to power G3 sufficiently).
  • Weight: 2kgs / 4.40lbs (Without Generator)

 

G3 USER MANUAL